Skip to main content

2016 Fall Mountain Trip Part 4; Death Valley and Dante's View Road

After reaching California State Route 190 I took it east over Towne Pass to Death Valley National Park.  My end goal was to take Dante's View Road up to the top of the Black Mountains east of Death Valley to Dante's View.


This is Part 4 of the 2016 Fall Mountain Trip Series.  Part 3 on Trona-Wildrose Road and Panamint Valley can be found here:

2016 Fall Mountain Trip Part 3; Panamint Valley and Trona-Wildrose Road

I mentioned the significance of Towne Pass in Part 3 as it was the route the Death Valley 49ers used to escape into Panamint Valley.  Rather than following modern CA 190 the Death Valley 49ers turned away from Towne Pass on what is now Emigrant Canyon Road.  The drop from the 4,956 foot Towne Pass is massive in both directions, its almost surreal to think that land at -282 feet below sea level is not far away eastward.




Heading eastward on CA 190 I stopped at Stovepipe Wells to see the site where the Death Valley 49ers burned their wagons.


East of Stovepipe Wells I stopped at Mesquite Flat Sand Dunes.  The Mesquite Dunes have used in various Star Wars movies are about 140 feet high in places.  The source of the sand is thought to come from the Cottonwood Mountains which lie to the north.


Approaching Furnace Creek on CA 190 there is ruins of the Harmony Borax Works off the side of the highway.  Although Borax was discovered by evacuees of Panamint City in the 1870s it wasn't until 1881 when the mineral was found at the location of the Harmony Borax Works.  The Harmony Borax were built in 1882 Works and were mostly known for the Twenty-Mule teams which would all Borax to the rail depots in Mojave during the cool seasons from until 1889.










East of the Harmony Borax Works I continued on CA 190 east of Furnace Creek and out of Death Valley.  CA 190 east of Death Valley quickly begins to ascend towards Death Valley Junction.  I turned south on Furnace Creek Wash Road towards the gap between the Amargosa Range and Black Mountains on an approach towards the Dante's View overlook.  A couple miles south of CA 190 Furnace Creek wash Road crosses paths with the ghost town of Ryan.







Ryan is located 3,045 feet above sea level in the Amargosa Range.  Ryan originally opened up in 1907 at the Lila C Mine which is southeast of the present location.  By 1914 the current site was opened as "Devar" before being quickly renamed to "Ryan."  The original town site of Ryan today is known as "Old Ryan" and is also a ghost town.  Ryan was the western terminus of the Death Valley Railroad which ran east to Death Valley junction and operated from 1914 to 1931.  The Death Valley Railroad was used to haul borax from Death Valley until 1928 when operations ceased.  The hotel in Ryan was in use as for guest overflow at the Furnace Creek Ranch and Inn until the 1950s.

South of Ryan Furnace Creek Wash Road continues southeast as a dirt road towards CA 178.  Dante's View Road splits away as a paved roadway towards the 5,476 foot Dante's View in the Black Mountains.  Dante's View Road is about 5.5 miles long and has massive uphill grades and switchbacks that definitely would be a challenge in summer months with the heat of the Mojave Desert.


From Dante's View almost the entirety of Death Valley and the eastern face of the Panamint Range can be seen.  There isn't really a trail per se from Dantes View but the ridge southward is flat enough to be easily traversed for a couple miles.  I thought it was gentle enough to actually do a couple miles of trail running before I returned to CA 190 to head towards Nevada.


Badwater Basin in particular is easily observed from Dante's View.


I'm uncertain when Dante's View Road was built but I suspect that the Ryan Mine had something to do with it as it does appear on the 1935 California Division of Highways Map of Inyo County.

1935 Inyo County Highway

Part 5 of this series can be found here:

2016 Fall Mountain Trip Part 5; To Las Vegas via NV 159

Comments

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...

The last 1956-63 era California Sign State Route Spade?

Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...

California State Route 70; the Feather River Highway

From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...