Skip to main content

Could the NCTA be absorbed by NCDOT?

Image
By
Well, a North Carolina State House measure may just do that. By 113-4 margin the NC State House approved a merger of the two agencies. A similar measure was ok'd by the State Senate when they approved their version of the state budget.

The merger is seen as a cost saving move in a state that faces an approximate $1.6 billion shortfall. However, it is unknown how much of a savings the merger of the two agencies would provide.

If the measure remains in the budget, the NCTA would report to the sitting NC Secretary of Transportation. However, the NCTA would continue working on toll projects throughout the state and any funding for the toll projects would not be impacted.

Story:
DOT to take over Turnpike Authority ---The Daily Advance

Commentary:
Not even five years after it was created as a separate entity - could this be the end of the NCTA? Of course, its projects would go on - but the agency would be under the supervision of the DOT.

I don't have an issue with the NCTA going under the responsibilities of NCDOT - but considering the multitude of errors made by NCDOT in this decade - will there actually be any efficiencies gained from this?

And finally, though it is said currently that none of the NCTA funding for their various projects would change as a result of the merger - the article is specific to the Mid-Currituck Bridge - I just don't see that happening as long as the state is in the red.
Labels:

Comments

Anonymous said…
This was the plan all the time. This allowed the poorly planned toll projects which were in the TIP for the late 2020's jump to the head of the line and gobble up the funding for all the other local projects and even take the money that had been illegally transferred from the Highway Trust Fund for the "gaps". Most of the original toll projects were low balled in cost to get the TPA started. Once the TPA was formed all of them grew in cost astronmically. Cape Fear Skyway was originally on the TIP for around 2030 and is a great example. Its estimated cost in 2004 was $350 million. It is now in 2009 listed between $1.1 and $1.5 billion. If the past is any indication that means $1.5 billion. "Gap" is now bigger than the cost of the bridge. But guess what, it is now the number one project on the WMPO TIP. If that is not bad enough now the TPA wants to toll a project that was never under their mandate from the legislature as a toll project, namely, the I-140 bypass of Wilmington. The I-140 bypass is funded in the TIP without tolls, so why should it be tolled to pay for another project that doesn't justify its existence financially. Current estimates are that tolls will only pay about 40% of the cost fo the bridge. Does that qualify as truly needed? Could there be other alternatives that would work just as well and be much less expensive?
6:49 PM
Post a Comment

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

By
  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...
Post a Comment
Read more

The last 1956-63 era California Sign State Route Spade?

By
Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...
Post a Comment
Read more

California State Route 70; the Feather River Highway

By
From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...
Post a Comment
Read more