Skip to main content

More Changed Exit Number Photos

This time on I-74 from Laurinburg to Pembroke, NC. This newest stretch of highway opened in two phases. The first section of the new road from US 74 Business (now US 74 Business/US 74 Alternate) to NC 710 opened in the Fall of 2007. At the same time I-74 shields, mileposts and exit numbers went up along the existing Laurinburg and Maxton Bypasses. The exit numbers ran from 207 to 226. The final segment opened a year later from NC 710 across I-95 to beyond NC 41 south of Lumberton. This stretch had mileposts running from 200 to 214. Both could not be right. I had contacted NCDOT in 2007 regarding the exit numbers they had put up thinking they were about 25 miles or so too high. It seems by 2008, they had come to a similar conclusion. They, at first, blanked out exit numbers, like what was Exit 207 seen below, where the old numbers duplicated those to the east:
When they finally got around to changing the numbers in late April and May of this year, the new exit number was 181 (new exit number photos courtesy of James Mast):
What once was the main exit to Laurinburg, US Business 15 and 401:

Exit 210, is now the more reasonable Exit 184:
And once the end of I-74 listed as Exit 226...
Is now the more well rounded, Exit 200:
The final exit number on I-74, going east, for now is 213 for NC 41:
And a bonus, in case some haven't seen what the exit signs for I-74/US 74 on I-95 look like:
For a look at all the photos taken along the new stretch of I-74 go HERE and choose Segments 15 and 16.

Comments

Popular posts from this blog

Did Caltrans just kill the G26 cutout US Route shields?

The US Route System was formally created by the American Association of State Highway Officials during November 1926.  Through the history of the system the only state to which has elected to maintain cutout US Route shields has been California.  The G26 series cutout US Route shields have become a favorite in the road enthusiast hobby and are generally considered to be much more visually pleasing than the standard Federal Highway Administration variant.  However, the G26 shield series appears to have been killed off on January 18, 2026, when Caltrans updated their Manual of Uniform Traffic Control Devices.  This blog will examine the history of the US Route shield specifications in California and what is happening with the 2026 changes.  The blog cover photo is facing towards the terminus of California State Route 136 and at a G26-2 specification US Route 395 shield.  In the background Mount Whitney can be seen in the Sierra Nevada range.   ...

May 2023 Ontario Trip (Part 3 of 3)

  Over the years, I have made plenty of trips to Ontario, crisscrossing the southern, central and eastern parts of the province. Living in Upstate New York, it's pretty easy to visit our neighbor to the north, or is that our neighbor to the west? Ottawa is one of my favorite cities to visit anywhere in the world, plus I've discovered the charm of Kingston, the waterfalls of Hamilton (which is on the same Niagara Escarpment that brings us Niagara Falls), the sheer beauty of the Bruce Peninsula, and more. But I hadn't explored much of Cottage Country. So I decided to change that, and what better time to go than over Memorial Day weekend, when the daylight is long and I have an extra day to explore. On the third and final day of my trip, I started in Huntsville and made my way through Muskoka District and Haliburton County, passing by many lakes along the way. I stopped in towns such as Dorset, Haliburton and Bancroft before making a beeline down to Belleville and then over th...

Ghost Town Tuesday; Nichols, FL

A couple years ago I spent a lot of spare time exploring phosphate mining ghost towns in the Bone Valley of Polk County, Florida.  One ghost town in particular called Nichols on Polk County Route 676 west of Mulberry caught my eye due to a relative lack of documentation on ghosttowns.com. Nichols was created in 1905 during the early phosphate mining boom in the Bone Valley region.  For the time Nichols was unusual since it had company housing in the Nichols Mine site and private residences outside the gate.  Nichols is only about two miles west of Mulberry which probably made it a somewhat reasonable commute even by the wonky standards of the early 20th Century.  Most of the Bone Valley region was relatively remote which made commuting or homesteading impractical which is why there are so many ghost towns in the area.  The company housing section of Nichols was phased out and abandoned by 1950. The Nichols town site is largely abandoned and could "possibl...