Skip to main content

Three highway projects key to Port of Wilmington (NC) growth

Interstate 140.

Interstate 74 and US 74 improvements.

Cape Fear Skyway.

What do all three of these projects have in common? Obviously, a number of things. But for the operators of the Port of Wilmington, the three highway infrastructure projects are key to the continued growth and expansion of North Carolina's largest port.

The Port facility currently handles an annual 350,000 trucks, and that number is expected to double to 700,000 annual truck volume by 2020. The Port is currently expanding their container handling facilities along with ongoing dredging of the Cape Fear River to handle larger vessels.

The three highway projects are important to the Port - which is currently accessed only by surface streets. The upgrading of US 74 and construction of I-74 will allow for quick freeway access to points West and Northwest - Charlotte and Greensboro. The I-140 project in addition to the Cape Fear Skyway will provided a timely bypass around Wilmington's surface street. The two projects - if completed - would allow for quicker access to US 17 and points South, the previously mentioned I-74 and US 74 routes, I-40 towards Raleigh and the I-95 East Coast Backbone, and US 17 to coastal points to the North.

However, the possibility of all three projects being completed by 2020 is not as definite as the expansion plans of the Port. Interstate 140 will most likely be finished by 2020, but without the Cape Fear Skyway - a direct connection between the Port and the beltway will not be possible.

- The Cape Fear Skyway which most likely will be built as a toll road is still up in the air as the North Carolina Turnpike Authority gets off the ground and over additional funding issues from the state.

- Interstate 74 and US 74 improvement have been ongoing for decades in North Carolina. Soon, the route from Charlotte to Wilmington will be at a minimum a four lane divided highway, but not a complete freeway. Interstate 74 most likely will have small gaps between I-95 and Whiteville and also between Maxton and Laurinburg. Although these segments are rural, a full freeway standard would allow for quicker travel times of containers to and from the port. US 74 beyond Rockingham towards Charlotte is a four lane highway with no access control. Improvements to bypass Monroe to I-485 (Charlotte Outer Loop) and also around small towns like Wingate and Wadesboro will be necessary for optimum travel for inbound and outbound freight.

Story: Wilmington Port prepares for expansion ---WWAY-TV

Comments

Anonymous said…
If anyone has any information about the proposal for I-74 to actually come into Wilmington, it would be appreciated.
I keep seeing sites that indicate that I-74 will turn south and go to Myrtle Beach. (They already have I-73 going there).

Your editorial is an exceptionally correct piece about the port. The added tax base for those containers and the increased revenue from tourist should almost pay for the upgrading and building.
Also, every effort should be made to have US74 added to the U.S. Interstate Highway System to enable the Federal Government to pay ninety percent (90%) of the cost.
Meaning a $1 Billion upgrade from Charlotte to Wilmington would cost the state only $100 million.

The skyway bridge ($120 million) should be part of the I-74 as well, let the Fed's pay for 90% of that too!!

The interstate 3, through the smokey moutains is far more expensive and no one wants it either.

Email your congress and legislatures to tell them to get on the ball, so it will be complete at the same time the port is finished.
Unknown said…
Your blog is very unique and contains information regarding highway projects which can be useful for entrepreneurs. Africa Tenders | International Tenders

Popular posts from this blog

Did Caltrans just kill the G26 cutout US Route shields?

The US Route System was formally created by the American Association of State Highway Officials during November 1926.  Through the history of the system the only state to which has elected to maintain cutout US Route shields has been California.  The G26 series cutout US Route shields have become a favorite in the road enthusiast hobby and are generally considered to be much more visually pleasing than the standard Federal Highway Administration variant.  However, the G26 shield series appears to have been killed off on January 18, 2026, when Caltrans updated their Manual of Uniform Traffic Control Devices.  This blog will examine the history of the US Route shield specifications in California and what is happening with the 2026 changes.  The blog cover photo is facing towards the terminus of California State Route 136 and at a G26-2 specification US Route 395 shield.  In the background Mount Whitney can be seen in the Sierra Nevada range.   ...

May 2023 Ontario Trip (Part 3 of 3)

  Over the years, I have made plenty of trips to Ontario, crisscrossing the southern, central and eastern parts of the province. Living in Upstate New York, it's pretty easy to visit our neighbor to the north, or is that our neighbor to the west? Ottawa is one of my favorite cities to visit anywhere in the world, plus I've discovered the charm of Kingston, the waterfalls of Hamilton (which is on the same Niagara Escarpment that brings us Niagara Falls), the sheer beauty of the Bruce Peninsula, and more. But I hadn't explored much of Cottage Country. So I decided to change that, and what better time to go than over Memorial Day weekend, when the daylight is long and I have an extra day to explore. On the third and final day of my trip, I started in Huntsville and made my way through Muskoka District and Haliburton County, passing by many lakes along the way. I stopped in towns such as Dorset, Haliburton and Bancroft before making a beeline down to Belleville and then over th...

Ghost Town Tuesday; Nichols, FL

A couple years ago I spent a lot of spare time exploring phosphate mining ghost towns in the Bone Valley of Polk County, Florida.  One ghost town in particular called Nichols on Polk County Route 676 west of Mulberry caught my eye due to a relative lack of documentation on ghosttowns.com. Nichols was created in 1905 during the early phosphate mining boom in the Bone Valley region.  For the time Nichols was unusual since it had company housing in the Nichols Mine site and private residences outside the gate.  Nichols is only about two miles west of Mulberry which probably made it a somewhat reasonable commute even by the wonky standards of the early 20th Century.  Most of the Bone Valley region was relatively remote which made commuting or homesteading impractical which is why there are so many ghost towns in the area.  The company housing section of Nichols was phased out and abandoned by 1950. The Nichols town site is largely abandoned and could "possibl...