Skip to main content

Snake Alley - Burlington, Iowa

One of the crookedest streets in the United States of America is in a place that you may not expect. In Burlington, Iowa, a small city located on the banks of the Mississippi River, lies Snake Alley. This is a twisty, curvy street that descends (or ascends) a hill between the residential and commercial parts of the city, named for a snake due to the way the street meanders around the hill. The business district of Burlington is built in a natural amphitheater surrounded by hills. With all the commerce situated in the valley, transportation was extremely difficult for the residents living on the steep hills surrounding the downtown. Therefore, the citizens of Burlington citizens decided to try an experiment for travel between the residential and commercial areas of town.


In 1894, Snake Alley was constructed with an experimental street design, filled with switchbacks. It was planned and implemented by three local residents who were also engineers and paving contractors, Charles Starker, William Steyh and George Kriechbaum. These gentlemen were involved with developing the parks and projects of Burlington during that time period. In designing Snake Alley, they opted to replicate the vineyard paths found in France and Germany, as a nod to their German roots. The brick paving of Snake Alley is still the original brick that Kriechbaum provided in 1894.

Snake Alley is composed of tooled, curved limestone curbing and locally fired bricks. The constantly changing slants from one curve to the next required a complicated construction technique to keep the high grade to the outside. As a result, Snake Alley consists of five half curves and two quarter curves over a total distance of 275 feet, rising 58.3 feet from Washington Street at the bottom to Columbia Street at the top for a 21% grade. The craftsmanship and soundness of materials used in the construction of Snake Alley have made it a durable street. Today, the brick paving is actually still the original that was used in its construction over a hundred years ago.

In 1974, Snake Alley was nominated to the National Register of Historic Places. The homes that surround the street were standing before construction began, giving the street the appearance of an alley.  With its many twists and turns, Ripley’s Believe It, Or Not! has named Snake Alley unbelievably crooked and one of the most unbelievable, curious spots in America. Snake Alley rivals the famously crooked Lombard Street in San Francisco for the honor. Visitors are encouraged to travel this landmark and symbol of heritage, in Burlington by foot, bicycle, or motor vehicle. While I did not drive up or down Snake Alley when I visited, I saw one car attempt to drive down, and it looked like a tricky endeavor.

Snake Alley has some events and lore as well. There is a legend that the fire department used this alley to test horses. If a horse could take the curves at a gallop and still be breathing when it reached the top, the horse was deemed fit to haul fire wagons. Unfortunately, many teams of horses would run out of control or stumble over the limestone curbing, resulting in a broken limb. The street is the site of an uphill bike race, the Snake Alley Criterium, held every Memorial Day weekend, and the Snake Alley Art Fair is a Father's Day tradition.








How to Get There:



Sources and Links:
Burlington, Iowa - History, Heritage & Snake Alley
Travel Iowa - Snake Alley
Des Moines Register - Photos of Snake Alley in Burlington, the crookedest street in the world
Greater Burlington Partnership - Snake Alley

Comments

Anonymous said…
Dang I never knew there was a Lombard Street or a Vermont Street in Iowa.

Note its officially known as Snake Alley.
Anonymous said…
I guess I should have done some more homework before going to and through Burlington a few times in recent years. I also never knew it was there.

Popular posts from this blog

Did Caltrans just kill the G26 cutout US Route shields?

The US Route System was formally created by the American Association of State Highway Officials during November 1926.  Through the history of the system the only state to which has elected to maintain cutout US Route shields has been California.  The G26 series cutout US Route shields have become a favorite in the road enthusiast hobby and are generally considered to be much more visually pleasing than the standard Federal Highway Administration variant.  However, the G26 shield series appears to have been killed off on January 18, 2026, when Caltrans updated their Manual of Uniform Traffic Control Devices.  This blog will examine the history of the US Route shield specifications in California and what is happening with the 2026 changes.  The blog cover photo is facing towards the terminus of California State Route 136 and at a G26-2 specification US Route 395 shield.  In the background Mount Whitney can be seen in the Sierra Nevada range.   ...

May 2023 Ontario Trip (Part 3 of 3)

  Over the years, I have made plenty of trips to Ontario, crisscrossing the southern, central and eastern parts of the province. Living in Upstate New York, it's pretty easy to visit our neighbor to the north, or is that our neighbor to the west? Ottawa is one of my favorite cities to visit anywhere in the world, plus I've discovered the charm of Kingston, the waterfalls of Hamilton (which is on the same Niagara Escarpment that brings us Niagara Falls), the sheer beauty of the Bruce Peninsula, and more. But I hadn't explored much of Cottage Country. So I decided to change that, and what better time to go than over Memorial Day weekend, when the daylight is long and I have an extra day to explore. On the third and final day of my trip, I started in Huntsville and made my way through Muskoka District and Haliburton County, passing by many lakes along the way. I stopped in towns such as Dorset, Haliburton and Bancroft before making a beeline down to Belleville and then over th...

Ghost Town Tuesday; Nichols, FL

A couple years ago I spent a lot of spare time exploring phosphate mining ghost towns in the Bone Valley of Polk County, Florida.  One ghost town in particular called Nichols on Polk County Route 676 west of Mulberry caught my eye due to a relative lack of documentation on ghosttowns.com. Nichols was created in 1905 during the early phosphate mining boom in the Bone Valley region.  For the time Nichols was unusual since it had company housing in the Nichols Mine site and private residences outside the gate.  Nichols is only about two miles west of Mulberry which probably made it a somewhat reasonable commute even by the wonky standards of the early 20th Century.  Most of the Bone Valley region was relatively remote which made commuting or homesteading impractical which is why there are so many ghost towns in the area.  The company housing section of Nichols was phased out and abandoned by 1950. The Nichols town site is largely abandoned and could "possibl...