Skip to main content

Sunday Drive (Down I-93) To I-95

The first (mostly) sunny day in about a week was a good excuse to drive over to Canton to see what progress had been made in the lane adding project and related (and unrelated) sign updating projects along I-93 between Exits 7 and 1. They have largely finished heading southbound between Exits 3 and 1. This is the first photo I could take of the new exit signs for Exits 2 and 1 with an unobstructed view of the new left lane.
I was able to take a closeup shot of the assembly between MA 138 and I-95 that crosses both sides of the highway:
Notice the highway surface which has been roughed up in anticipation of a new (final?) coat of asphalt.

One of the overhead assemblies they have not put up is a 1/2 sign for the MA 138 Exit heading northbound. With the previous one taken down, one has a good view toward I-95 and beyond:
The barriers along the new lane were removed in the past couple weeks, an additional lane will open up on the right for the I-95 Exit. A closer look at the final signs for the I-93 Exit 1, showing progress in putting in the new median barrier in, almost now to the I-95 bridge:
I headed onto I-95 North and then a quick turnaround at the University Ave, Exit 13 interchange. Heading back on I-93 North, this is a view approaching MA 138, showing final landscaping work being performed. A fifth lane will be added here between the on-ramp from I-95 North to MA 138:
 A closer look at the other side of the cross-highway overhead seen in the distance above:
Guess they could think of no other worthy destination to put at the bottom of the MA 138 South sign. 

There were no new signage to take photos of toward the MA 24 exit, so I thought I'd take, possibly for the last time a photo of the current signs:
If you look closely to the right beyond the existing sign support you can see the foundation awaiting the new overhead signs, there is one on the left and also ones for Exit 3 heading south. 

Further on up I-93 there is some evidence as to the future re-signing project getting underway. After most of the current overhead signs you see an orange tag which has the sign contractors name, Liddell Brothers, and a letter/number code. Here's the tag at the MA 28 exit:
If you look closely anyway. The codes have OD then a number. The D referring to they type of signage? Here's another closer shot at a tag by the current 1/2 mile sign for Exit 6, MA 37:
On the Southeast Expressway portion (I-93/US 1/MA 3) there are few of these tags at the overhead sign posts but many others at different places. Some have 'VMS' on the orange tag signs implying a place for a future permanent Variable Message Sign. You can see from this photo heading south at the 'Braintree Split' that the sign replacement project cannot come soon enough, for the one on the right:

I hope to get at least one more trip to the area before I leave for North Carolina in June. Else I'll try to get some photos on my way south.

Comments

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...

The last 1956-63 era California Sign State Route Spade?

Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...

California State Route 70; the Feather River Highway

From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...