NCDOT Changes Mind about I-40 Route through Greensboro

The FHWA has agreed to let NCDOT return I-40 to its original alignment through Greensboro's Death Valley. When the SW quadrant of the Loop was completed earlier this year and I-40 routed along the new highway, local residents complained about the noise, particularly truck noise, from the new highway. Many complained that NCDOT never told them it would be a freeway, as expressed in this paragraph from today's article in the Greensboro News & Record:
"Irate neighbors of the 7.7-mile, $122 million stretch of road said they had been surprised by the volume of truck traffic on what they understood would be a bypass more on the order of Bryan Boulevard."

NCDOT hopes the redesignation will mean most of the truck traffic will return to I-40’s initial route as soon as the state can prepare and install new signs. [Comment: Where did the old I-40 signs they just took down go? Couldn't they use them?] They feel that since I-73 is a fledgling route that currently does not go north beyond Greensboro, the Loop will have less traffic on it.

What this all will mean:

1. Changing the green I-40 Business signs back to the blue I-40 signs.
2. Re-labeling the exits along I-40 as Exit 212 (I-40/73) to Exit 227 (I-40/85).
3. Re-labeling the exits along I-73 as Exit 103 (I-73/40 interchange) to Exit 95 (I-73/U.S. 220 interchange) [Comment: Since I-73 shouldn't exit itself, Exit 95 should be for I-85 North].
4. Rerouting U.S. 421 to run concurrently with I-73 and parts of I-85.
5. Signs for the I-85 Business route and the I-85 exits will remain the same.

Story in the Winston-Salem Journal

Story in the Greensboro News & Record

Commentary:

I have always argued that the western part of the past and future I-40 should never have been given a business interstate designation since it's up to modern interstate standards. Given that the FHWA allowed the route east including Death Valley to be re-designated an interstate calls into question NCDOT's explanation of changing former interstates to business routes because they are not up to current interstate standards. If I-40 is to run on its old routing does it make sense to still sign that part also as Business 85? A better idea would be to remove that designation from the I-40 part and make the rest just US 29/70, or if you wanted an interstate, an I-x85 spur route.

This latest piece of news from NCDOT sounds familiar. NCDOT makes decision without apparently communicating clearly to people of importance (in this case very vocal citizens), NCDOT then has to re-do at least part of the project and who pays the extra cost? NC taxpayers, of course.

This decision also calls into question the reason behind building a Loop entirely around Greensboro. The point was constantly made during the southern part's construction that it had to be done to remove as much traffic as possible from the Death Valley traffic choke point. Now that doesn't seem as important as satisfying a few loud and critical citizens. Hopefully, smart travelers going west will still use the I-85 Loop then go north on US 220 to get around Death Valley and return to I-40. All the signs are to be changed by December.

Grand Loop Road of Yellowstone National Park

Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park. Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads. Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System. Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872. The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs. Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...

The last 1956-63 era California Sign State Route Spade?

Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign. These white spades were specifically used during the 1956-63 era and have become increasingly rare. This blog is intended to serve as a brief history of the Sign State Route Spade. We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others? Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers. The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California. Early efforts to create a Sign State Route ...

California State Route 70; the Feather River Highway

From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99. CA 70 is often referred to as the Feather River Highway" given it's close association with the river. Historically CA 70 was previously signed as US 40A and CA 24. The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: - Legislative Route Number 21 from US 395 westward to Oroville. - LRN 87 from Oroville south to Marysville. - LRN 232 from Marysville to the current junction with CA 99. CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...

Bob Malme said…

An additional story (and video) on WRAL.com pegs the cost of returning I-40 to its original alignment at $300,000.
See the link here:
http://www.wral.com/traffic/story/3550101/

An NCDOT official commenting on the Internet newsgroup misc.transport.road suggested another reason the I-40 routing was reconsidered, the loss of federal interstate maintenance funds. The funds go to help states repair interstate routes, but not interstate business routes. By putting I-40 back on its old alignment NCDOT regains money to help in any future road work along the old route (that they spent the summer repaving, don't know if federal funds can be claimed retroactively) while also getting money for the Urban Loop.

An editorial in the Greensboro News & Record on 9/17 cited positive feedback by some of the noise affected residents to the re-routing suggesting some signs have changed already. If anyone traveling through the Greensboro area has signage updates, we'd love to hear them.

8:57 PM

There's a good story confirming that money and not civic mindedness was the impetus behind the I-40 route change in today's (9/18) News & Observer.

The link is here:
http://www.newsobserver.com/news/ growth/traffic/story/1223303.html

11:37 AM

Froggie said…

First off, if one's using the I-85 part of the loop, why on earth would they use US 220 to get back to I-40?

Second, the signs (i.e. I-40 going back to its original route) may work with out-of-town travelers who don't know any better, but regulars/locals/those-with-experience will still use the southern loop to bypass old 40/85 through Greensboro. Especially if the truckers perceive an advantage to remaining on the loop, they'll remain on the loop and everyone's (NCDOT and local residents) arguments for "reducing noise" will be rendered for naught.

(and serves 'em all right too IMO)

7:58 PM