Skip to main content

I-74/US 74 Freeway Now Open Eastbound from Maxton to Lumberton

Since Duke wasn't playing today and I figured all the Raleigh people may want to stay and watch the NC State-ECU game, I decided to take a tour to see the progress of the I-74 freeway in Robeson County. Since there had been no publication about an opening date I assumed the best I would find was a change in exit numbers based on an e-mail I sent to the project's engineer earlier this year in which he acknowledged the numbers were wrong. I thus was surprised when I got to (still) Exit 320 on I-74/US 74 and noticed traffic no longer had to get off the highway to proceed on the interstate eastbound. When I got to Exit still numbered 226 I had another surprise....
The road was open beyond the exit. Thus curious, I decided to proceed on. The next exit as listed in the plans should be Dew Road, Pembroke. It was, but notice the exit number...


It is now 203, 27 miles less than it should be and equal to the number for the milepost I sent to the NCDOT earlier in the year when I noticed the exit numbers were too large. The remaining exits match my mileposts (as posted in my I-74 Exit List) almost exactly:
Exit Plan Mile # Malme Mile # Actual Exit #
Dew Rd, Pembroke 230 203 203
Back Swamp Rd 234 207 207
I-95/US 301 235A/B 208A/B 209A/B
Alternate US 74 237 210 210
I assume as part of completing the project the rest of the exits starting in Laurinburg will be changed as well, I will post what those numbers should be on my exit list. I am assuming that NCDOT will not force the traveling public to use two sets of exit numbers on one continuous freeway.

Continuing on, here are some other photos of some of the signs along the eastbound route:

The speed limit is 70 mph, though they have not adjusted up the speed around the Exit (for now) 320 interchange which is still 55.
Here's the next exit eastbound Back Swamp Road, there's no obvious reason for an interchange here, development will occur, I guess, eventually.
Here's the first sign for the upcoming I-95/US 301 interchange, the only ground mounted sign.
The remainder are overhead assemblies, with separate ramps for north and southbound. The freeway becomes 3 lanes in each direction at that point.

Here's the overheads at Exit 209B. Coming back around I took the ramp that leads to C/D ramps paralleling I-95.

All is ready except opening the ramp and removing the cover on the I-74/US 74 West sign. The east signs on the C/D ramps were uncovered, but the interchange was not open and all I-74 signs on I-95 going south were covered as well.

Here's the last exit currently with a number, US 74 Alternate, there is one more exit, NC 41, but the signs haven't been updated there yet. They still have to do work to complete this final 2 mile section to bring it up to interstate standards, update the signs and close the former left turn ramps. The traffic on US 74 west still uses the old route alignment. The still need to fully grade between the old and new highways before this section can be open. The section west of I-95 was being worked on and appeared almost ready to open.

After turning around and using the existing US 74, I accessed the Dew Road interchange by taking Chicken Road off of US 74 to confirm all the westbound ramps were still not open to the east of NC 710. The eastbound signs were up, as expected, the one control city listed was Wilmington. The western ramps were closed and all the signs for the westbound roadway were up, but covered.

I believe construction could be totally finished in the next few weeks. I'll wait until an official announcement to make another tour, other interested parties are invited.

Comments

Anonymous said…
This comment has been removed by a blog administrator.
Bob Malme said…
NCDOT will open the rest of the freeway (at least west of I-95) after a ribbon cutting ceremony on Friday Sept. 26 at 10AM.
Bob Malme said…
The road is now open in both directions according to this NCDOT press release:
https://apps.dot.state.nc.us/pio/releases/details.aspx?r=1869s

Hopefully more photos of the route will be up soon.

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...

The last 1956-63 era California Sign State Route Spade?

Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...

California State Route 70; the Feather River Highway

From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...