Skip to main content

I-74/US 74 Freeway Now Open Eastbound from Maxton to Lumberton

Since Duke wasn't playing today and I figured all the Raleigh people may want to stay and watch the NC State-ECU game, I decided to take a tour to see the progress of the I-74 freeway in Robeson County. Since there had been no publication about an opening date I assumed the best I would find was a change in exit numbers based on an e-mail I sent to the project's engineer earlier this year in which he acknowledged the numbers were wrong. I thus was surprised when I got to (still) Exit 320 on I-74/US 74 and noticed traffic no longer had to get off the highway to proceed on the interstate eastbound. When I got to Exit still numbered 226 I had another surprise....
The road was open beyond the exit. Thus curious, I decided to proceed on. The next exit as listed in the plans should be Dew Road, Pembroke. It was, but notice the exit number...


It is now 203, 27 miles less than it should be and equal to the number for the milepost I sent to the NCDOT earlier in the year when I noticed the exit numbers were too large. The remaining exits match my mileposts (as posted in my I-74 Exit List) almost exactly:
Exit Plan Mile # Malme Mile # Actual Exit #
Dew Rd, Pembroke 230 203 203
Back Swamp Rd 234 207 207
I-95/US 301 235A/B 208A/B 209A/B
Alternate US 74 237 210 210
I assume as part of completing the project the rest of the exits starting in Laurinburg will be changed as well, I will post what those numbers should be on my exit list. I am assuming that NCDOT will not force the traveling public to use two sets of exit numbers on one continuous freeway.

Continuing on, here are some other photos of some of the signs along the eastbound route:

The speed limit is 70 mph, though they have not adjusted up the speed around the Exit (for now) 320 interchange which is still 55.
Here's the next exit eastbound Back Swamp Road, there's no obvious reason for an interchange here, development will occur, I guess, eventually.
Here's the first sign for the upcoming I-95/US 301 interchange, the only ground mounted sign.
The remainder are overhead assemblies, with separate ramps for north and southbound. The freeway becomes 3 lanes in each direction at that point.

Here's the overheads at Exit 209B. Coming back around I took the ramp that leads to C/D ramps paralleling I-95.

All is ready except opening the ramp and removing the cover on the I-74/US 74 West sign. The east signs on the C/D ramps were uncovered, but the interchange was not open and all I-74 signs on I-95 going south were covered as well.

Here's the last exit currently with a number, US 74 Alternate, there is one more exit, NC 41, but the signs haven't been updated there yet. They still have to do work to complete this final 2 mile section to bring it up to interstate standards, update the signs and close the former left turn ramps. The traffic on US 74 west still uses the old route alignment. The still need to fully grade between the old and new highways before this section can be open. The section west of I-95 was being worked on and appeared almost ready to open.

After turning around and using the existing US 74, I accessed the Dew Road interchange by taking Chicken Road off of US 74 to confirm all the westbound ramps were still not open to the east of NC 710. The eastbound signs were up, as expected, the one control city listed was Wilmington. The western ramps were closed and all the signs for the westbound roadway were up, but covered.

I believe construction could be totally finished in the next few weeks. I'll wait until an official announcement to make another tour, other interested parties are invited.

Comments

Anonymous said…
This comment has been removed by a blog administrator.
Bob Malme said…
NCDOT will open the rest of the freeway (at least west of I-95) after a ribbon cutting ceremony on Friday Sept. 26 at 10AM.
Bob Malme said…
The road is now open in both directions according to this NCDOT press release:
https://apps.dot.state.nc.us/pio/releases/details.aspx?r=1869s

Hopefully more photos of the route will be up soon.

Popular posts from this blog

Did Caltrans just kill the G26 cutout US Route shields?

The US Route System was formally created by the American Association of State Highway Officials during November 1926.  Through the history of the system the only state to which has elected to maintain cutout US Route shields has been California.  The G26 series cutout US Route shields have become a favorite in the road enthusiast hobby and are generally considered to be much more visually pleasing than the standard Federal Highway Administration variant.  However, the G26 shield series appears to have been killed off on January 18, 2026, when Caltrans updated their Manual of Uniform Traffic Control Devices.  This blog will examine the history of the US Route shield specifications in California and what is happening with the 2026 changes.  The blog cover photo is facing towards the terminus of California State Route 136 and at a G26-2 specification US Route 395 shield.  In the background Mount Whitney can be seen in the Sierra Nevada range.   ...

May 2023 Ontario Trip (Part 3 of 3)

  Over the years, I have made plenty of trips to Ontario, crisscrossing the southern, central and eastern parts of the province. Living in Upstate New York, it's pretty easy to visit our neighbor to the north, or is that our neighbor to the west? Ottawa is one of my favorite cities to visit anywhere in the world, plus I've discovered the charm of Kingston, the waterfalls of Hamilton (which is on the same Niagara Escarpment that brings us Niagara Falls), the sheer beauty of the Bruce Peninsula, and more. But I hadn't explored much of Cottage Country. So I decided to change that, and what better time to go than over Memorial Day weekend, when the daylight is long and I have an extra day to explore. On the third and final day of my trip, I started in Huntsville and made my way through Muskoka District and Haliburton County, passing by many lakes along the way. I stopped in towns such as Dorset, Haliburton and Bancroft before making a beeline down to Belleville and then over th...

Ghost Town Tuesday; Nichols, FL

A couple years ago I spent a lot of spare time exploring phosphate mining ghost towns in the Bone Valley of Polk County, Florida.  One ghost town in particular called Nichols on Polk County Route 676 west of Mulberry caught my eye due to a relative lack of documentation on ghosttowns.com. Nichols was created in 1905 during the early phosphate mining boom in the Bone Valley region.  For the time Nichols was unusual since it had company housing in the Nichols Mine site and private residences outside the gate.  Nichols is only about two miles west of Mulberry which probably made it a somewhat reasonable commute even by the wonky standards of the early 20th Century.  Most of the Bone Valley region was relatively remote which made commuting or homesteading impractical which is why there are so many ghost towns in the area.  The company housing section of Nichols was phased out and abandoned by 1950. The Nichols town site is largely abandoned and could "possibl...