Skip to main content

NCDOT Approves I-74 'Widening'

Image
By
On the same day NCDOT announced a major reorganization to make it more efficient and less prone to errors they also announced the winning bids for several construction contracts. These included the design-build contract for the remainder of the US 311 bypass (I-74), 7.9 miles from Spencer Road to US 220. Construction is to start September 2 and the project is to be completed by 2012. It will be built using GARVEE bond funds. The one problem though is that in all press releases for this project they refer to the project as a 'widening.'

See the press release HERE.

Comments: At least it appears they got the mileage for the project correct this time. They still insist the 10+ mile section now under construction is about 6 miles long. I guess it's two steps forward and one step back, so I guess that counts as progress.

Speaking of the existing I-74 project from Business 85 to Spencer Road that is due to be finished in 2011, it is almost twice ahead of schedule as projected (40% vs 21%). A source that lives nearer the construction site took a look at the I-85 interchange area yesterday and said many of the bridges are now paved along with one of the C/D ramps they're building along I-85 which was being used by construction equipment. I may be out that way next week, if so I'll try to post some photos.
Labels:

Comments

Bob Malme said…
When I saw no change yesterday in the press releases indicating that the new I-74 contract was for widening, I decided to e-mail the communications office. I pointed out that this was an error and that the project press release should indicate the design-build contract was for constructing a new roadway.

I guess NCDOT's new mantra of responding more quickly to the public is true in this case. If you click the link above to the press release you will notice a smaller type 'Constructing' has replaced 'Widening' in the first sentence. If only they were as quick as this in correcting sign errors.
5:47 PM
Post a Comment

Popular posts from this blog

Grand Loop Road of Yellowstone National Park

By
  Grand Loop Road is a 140 mile loop highway which traverses the interior of Yellowstone National Park.  Grand Loop Road connects all of the major attractions and geological features of Yellowstone National Park along with the entrance roads.  Grand Loop Road is a seasonal highway and despite some conjecture never has been part of the US Route System.   Part 1; the history of Grand Loop Road The majority of history pertaining to Grand Loop Road was taken from the below National Park Service article: Historic Roads - Yellowstone National Park (U.S. National Park Service) (nps.gov) Yellowstone was declared the first National Park of the United States on March 1st, 1872.  The first real highway to access Yellowstone National Park came in 1873 when a tolled facility was constructed from Bozeman, Montana via Yankee Jim Canyon to Mammoth Hot Springs.  Numerous attempts were made to fund construction of roadway infrastructure during the early years of Yellows...
Post a Comment
Read more

The last 1956-63 era California Sign State Route Spade?

By
Along southbound California State Route 170 (the Hollywood Freeway Extension) approaching the Hollywood Freeway/Ventura Freeway interchange a white California State Route 134 Sign State Route Spade can be observed on guide sign.  These white spades were specifically used during the 1956-63 era and have become increasingly rare.  This blog is intended to serve as a brief history of the Sign State Route Spade.  We also ask you as the reader, is this last 1956-63 era Sign State Route Spade or do you know of others?  Part 1; the history of the California Sign State Route Spade Prior to the Sign State Route System, the US Route System and the Auto Trails were the only highways in California signed with reassurance markers.  The creation of the US Route System by the American Association of State Highway Officials during November 1926 brought a system of standardized reassurance shields to major highways in California.  Early efforts to create a Sign State Route ...
Post a Comment
Read more

California State Route 70; the Feather River Highway

By
From 2017 through to early 2019 I drove the majority of the California State Route 70; the Feather River Highway from CA 89 southwest to CA 99. CA 70 is an approximately 178.5 mile state highway which starts at US 395 near the Nevada State Line and travels west through the Feather River Canyon to CA 99.  CA 70 is often referred to as the Feather River Highway" given it's close association with the river.  Historically CA 70 was previously signed as US 40A and CA 24.  The Legislative Routes prior to the 1964 California Highway Renumbering that made up the current route of CA 70 are as follows: -  Legislative Route Number 21 from US 395 westward to Oroville. -  LRN 87 from Oroville south to Marysville. -  LRN 232 from Marysville to the current junction with CA 99.  CA 70 was even dual signed with CA 99 into Sacramento on what was LRN 232 for a time. The change from US 40A/LRN 21/LRN 87/LRN 232 can be seen by comparing the 1963 State Highway Ma...
Post a Comment
Read more